What aspects should be paid attention to when installing the butterfly valve? First, after opening the package, the Taike butterfly valve cannot be stored in a humid warehouse or open air environment, nor can it be placed anywhere to avoid rubbing the valve. The location of the installation should be well thought out before mentioning it. The best valve handwheel should be aligned with the chest, so that opening and closing the valve will save effort, and the valve should be cleaned before use.
Taike butterfly valves have the same directionality as Taike globe valves, throttle valves, pressure reducing valves and other valves. When installing, first check the mark on the valve and pay attention to the flow direction of the medium and the mark on the valve. The butterfly plate of Taike butterfly valve should be installed in the direction of the pipe diameter, and the butterfly plate should be stopped in the closed position. At the same time, it is recommended that the majority of users place the valve shaft horizontally. If there are uneven media such as elbows in the inlet pipe, the bias flow should be evenly arranged on the two sides of the butterfly plate, and the force should be uniform. The general structure of Taike butterfly valve is not long, so it is necessary to prevent the butterfly plate from colliding and interfering with other parts. The connection between the valve and the pipeline should use the special flange of Taike butterfly valve. Some valves also have a bypass valve. The bypass valve must be opened before opening. The most important point is to follow the installation instructions step by step, so as not to affect the use effect and life of the product during the installation process.
Post time: Sep-26-2021