Strainer

Y STRAINER

This product is mainly installed in all kinds of water supply and drainage lines or steam lines and gas lines.To protect other fittings or valves from debris and impurities in the system.

See more products >
Y12 Series Relieve Valve

SPECIFICATIONS

Nominal pressure: 1.0~1.6Mpa
Strength testing pressure: PT1.5, PT2.4
Seat testing pressure(low pressure):0.6Mpa
Applicable temperature: 0-80℃
Applicable Medium: Water, Oil, Gas,
Non corrosive fluid medium

See more products >
Ansi, Jis Flanged Strainers

Performance specifications

• Flange end: ASME B16.5
• Test standards: API 598

specircations

- Nominal pressure: CLASS150/300
• Shell test pressure: PT1.5PN
• Suitable medium:
SY41-(150-300BL)C Water. Oil. Gas
Sy41-(150-300BL)P Nitric acid
Sy41-(150-300BL)R Acetic acid
• Suitable temperature: -29°C-425°C

See more products >
Y-Type Female Strainer

Specifications

• Nominal pressure: PN1.6,2.5,4.0,6.4Mpa
- Strength testing pressure: PT2.4, 3.8,6.0, 9.6MPa
• Applicable temperature: -24℃~150℃
• Applicable media:

SY11-(16-64)C Water. Oil. Gas

SY11-(16-64)P Nitric acid

SY11-(16-64)R Acetic acid

See more products >
Gb, Din Flanged Strainers

Product Standards

- Flange end: GB/T 9113, JB/T 79, HG/T 20529, EN 1092
• Test standards: GB/T 13927, API 598

specifications

- Nominal pressure: PN1.6,2.5MPa
- Shell test pressure: PT2.4, 3.8MPa
• Suitable medium:
SY41-(16-25)C Water. Oil. Gas
SY41-(16-25)P Nitric acid,
SY41-(16-25)R Acetic acid
• Suitable temperature: -29℃~425℃

See more products >
Stainless Steel Angle Seat Valve

DESIGN & MANUFACTURE STANDARD

• Design and manufacture as GB/T12235, ASME B16.34
• End flange dimension as JB/T 79, ASME B16.5, JIS B2220
• The thread ends conform to ISO7-1, ISO 228-1 etc.
• The butt weld ends conform to GB/T 12224, ASME B16.25
• Clamp ends conform to ISO, DIN, IDF
• Pressure test as GB/T 13927, API598

Specifications

• Nominal pressure: 0.6-1.6MPa,150LB,10K
- Strength test: PN x 1.5MPa
- Seal test: PNx 1.1MPa
• Gas seal test: 0.6MPa
• Valve body material: CF8(P), CF3(PL), CF8M(R), F3M(RL)
• Suitable medium: water, steam, oil products, nitric acid, acetic acid
• Suitable temperature: -29℃~150℃

See more products >